LED Angel Eyes Halo Ring Kit — Universal Fit
Universal-fit LED halo rings that add a glowing ring around your headlights — the same "angel eyes" look that started as a BMW factory feature and became one of the most recognized car-mod signatures out there.
What's included:
- 2x COB LED halo rings, available in 60mm through 120mm to fit a wide range of headlight, fog light, and DRL housings
- 5 colors: White, Red, Blue, Green, Yellow
- 9V–30V DC compatible — works on standard 12V systems and 24V heavy-duty vehicles
- Nonpolarity wiring — no positive/negative to worry about during install
Install: Requires opening the headlight housing to mount the rings around the projector or reflector bowl, then wiring to a switch or power source. Similar difficulty to most headlight retrofit work — plan for an afternoon if it's your first time.
Fit: Universal design fits most cars and motorcycles. Double-check your headlight housing's ring size before ordering — sizes run from 60mm to 120mm, and there's a normal 1–3mm manufacturing tolerance on every size.
Legal note: White is street-legal for driving in every US state. Red, Blue, Green, and Yellow are intended for parked, show, and off-road use — check your local vehicle code before using colored modes while driving.
Before You Start
You're about to make your headlights hit different. This guide walks you through a full install — plan on roughly 45 to 90 minutes per headlight the first time. No dealership, no shop bill. Just you, basic tools, and a garage.
| What's In The Box | Qty |
|---|---|
| LED COB halo rings (your selected size) | 2 |
| Nonpolarity connecting leads | 2 |
Remove The Headlight
Disconnect the battery, remove the fasteners, and gently pull the housing free.
Open The Housing
Warm it to soften the factory seal, then carefully separate the lens from the shell.
Mount The Halo Ring
Seat the ring around your projector or reflector bowl — it should sit snugly, no forcing.
Run The Wiring
Nonpolarity wiring, no positive/negative to worry about. Wire to a switch or your parking circuit.
Reseal And Reinstall
Fresh sealant, clamp closed, reinstall, reconnect the battery, test before closing up.
Contact Us
Got a question? We actually read these — real answers within 1-2 business days.